手指关节以制作家具和众多而闻名woodworksthat require a neat finish and appearance. However, there exist several important steps to pay attention to when making finger joints.
finger wood joints
Table of Contents
证券交易委员会tion 1: What are The Finger Joint Woodwork?
1.1 What are finger joints?
1.2 Types of finger joints.
1.2.1 Square finger joint
This joint is one of the most common out there. Nevertheless, you can design it by joining different wood stocks from one end to the other.
1.2.2 Stepped finger joint
This joint finger type has a relatively simple design, with its manufacturing coming from stacking multiple saw blades with different blade sizes and cutting the wood stock.
1.2.3 Slanted cut finger joint
The diagonal cut finger joint is angular. Also, it is characterized by cutting with a predetermined blade tilt angle at a trigonometric calculation.
证券交易委员会tion 2: The Finger Joint Woodwork– How to cut finger joints?
So, to begin, you mustchoose the most suitable blade for your project. As a rule, you should use a combo blade on your saw. However, you should avoid combo blades having Alternate Top Bevel (ATB) teeth. This is because the ATB teeth cause your joint to be flat at the top. Your best option would be the ripping blade or a blade with a flat top tooth.
2.2 What tools do you need?
- Dovetail saw
- Coping saw
- Chisels and a mallet
- Small try square
- Table Saw
2.3 Setting up the cut and key.
Put your miter in the space of your table saw and select a piece bit of wood for a patron. Then, holding the patron against the miter measure, make one cut with your sharp edge.
Now set the height of the blade just above the thickness of the wood that will cut. Therefore, we recommend making a test joint on a piece of wood, similar to what you are doing. It’s conceivable that the supporter may require some slight acclimations to protect that the joint is the appropriate fit. Also, you can make the changes by releasing the screws holding the sponsor to the miter check and making slight moves nearer or further away from the sharp edge.
To begin the joint’s cuts, place your first board vertically against the patron and the edge flush to the stop and clip it set up. With your hands and fingers securely away from the cutting edge, make the main cut. Also, at that point, unclamp the board and slide the space that you slice on to the stop. Presently you can clasp the board set up and make your subsequent cut. Rehash this cycle until you arrive at the contrary edge of the board.
2.5 The Finger Joint Woodwork– Cutting the joints
As you progress to the tail end of your board, you will most likely have an incomplete cut. At this point, toss your board to face the backer. Hence, slide your first cut into the slot. Furthermore, take your second board and flush against the first board and clamp it in place to be cut by your blade. After cutting through both boards, separate the second, slide it against the stop, and then continue to cut until another edge.
2.7手指关节木制品 - 夹紧。
Click for avideowith up-to-date information on what finger joints are as well as how to make a perfected fitted finger joint.
证券交易委员会tion 3: Is The Finger Joint Woodwork same as the box joint?
Most people regard the box joint and finger joint as the same. However, for specialists in woodworking, they believe there are intricate characteristics that make them different. Let’s take a look at how these joints differ.
The Finger Joint Woodwork vs. Box joint
In contrast, box joints fill a vastly different need. A box joint is like adovetail joint. However, a major difference is that the cuts here are not strict. Instead, they are frequently rectangular.
The finger joint is suitable for a vast range of applications, and this article has covered essential steps you must follow. Additionally, it is important that you work with trusted manufacturers and suppliers of saw blades and woodworking equipment.NCCuttingtools让你覆盖了。我们已经经验丰富的专业人士以及高质量的工具。